JENWAY PFP 7 and PFP 7/C flame photometers

Laboreszköz katalógus Marketplace 0Cart

Jenway

Request a price

In addition to the ease of maintenance of the PFP7 device, its most important features are:

- Na, K, Ba, Ca and Li filters as standard equipment

- It is advisable to use your own compressor

- electronic flame guard

- coarse and fine sensitivity control

- propane, butane, natural gas mode

- register output

PFP 7 is specially designed for industrial and environmental protection applications. The built-in linearization circuit enables the reading of both Na and K directly in concentration units.

PFP 7/C is manufactured for clinical applications. Na, both K readings directly in mmol/l, in the normal clinical serum concentration range.

Before spraying into the photometer, the serum samples were diluted 200:1 or It must be diluted in a ratio of 100:1.

Both types are sold with Na and K filters, connecting pipes, clamps, compressor plug, condensate trap, fuses, and network cable.

Jenway PFP7 and PFP7/C flame photometers technical data:

Specifications:	PFP 7	PFP 7/C
Measuring range:	-	120-160 mmol/l Na (linearized), 0-10.0 mmol/l K
Detection limit:	Na < 0.2 ppm, K < 0.2 ppm, Li < 0.25 ppm, Ca < 15 ppm, Ba < 30 ppm	-, -, Li < 0.25 ppm, Ca < 15 ppm, Ba < 30 ppm
Reproducibility:	<1% coefficient of variation for 20 consecutive measurements set to a reading of 10 ppm Na 50.0	<1% coefficient of variation for 20 consecutive measurements set to a reading of 10 ppm Na 50.0
Linearity:	better than 2%, adjusted to 3 ppm K and 5 ppm Li 100	better than 2%, adjusted to 3 ppm K and 5 ppm Li 100
Specificity:	Na, K and Li interference is the same as the tested element, in case of concentration it is less than 0.5%	Na, K and Li interference is the same as the tested element, in case of concentration it is less than 0.5%
Register output:	nominal 1.00 V for a reading of 100.0	nominal 1.00 V for a reading of 100.0
Service request:	electric: 190-250 V, 50/60 Hz, air: moisture and oil free, 6 l/min (1 kg/cm2), fuel gas: propane, butane, natural gas, liquefied gas
Dimensions:	420 x 360 x 300 mm	420 x 360 x 300 mm
Weight:	8 kg	8 kg

picture

code

Name

net price

amount

in stock

Model PFP7 Flame Photometer, digital, fitted with electronic flame fail safe and supplied with Na, K, LI, Ba and Ca filter

73.500701

PFP7 industrial flame photometer

Request a price

Supplied with Na, K, Ba, Ca and Li filters

Jenway PFP7/C lángfotométer klinikai kivitel, Na, K, Li szűrővel

73.500801

PFP7/C clinical flame photometer

Request a price

(nincs benne Ba és Ca szűrő), egycsatornás, digitális kijelzés, elektromos lángellenőrző, gáz és levegőcsatlakozó vezetékekkel és szerelvényekkel, kompresszor dugó, folyadékcsapda és használati útmutatóval. Közvetlen mmol/l koncentráció kijelzés Tartomány: 120 - 160 mmol/l Na, 0 - 10,0mmol/l K Kimutatási határok: Na: 0,2 ppm, K: 0,2 ppm, Li: 0,25 ppm Ismételhetőség: <1% Linearitás: <2% Telepítési igények: sűrített levegő (olaj és nedvesség mentes): 6 l/perc, Égőgáz, propán, bután, földgáz. Tartozékok: gáz és levegőcsatlakozó vezetékek, kompresszor dugó, folyadékcsapda. Méret: 420 x 360 x 300 mm A készülék csak adott típusú kompresszorral működik megfelelően! Tömeg: 8 kg.